Spray Caps
One-piece dispensing tops that combine the actuator and over-cap in a single fitment for a finished look.
L01
L01 is a one-piece ø35 mm spray cap from APU’s unisex L-series, combining a spout with a regular insert and an assembled over-cap (short flat (21.5 mm height)). It suits liquids, foams and gels, fits 1″ male valves and BOV systems, and is available with a long or short skirt for ogival- or flat-shoulder cans.
L02
L02 is a one-piece ø35 mm spray cap from APU’s unisex L-series, combining a spout with a regular insert and an assembled over-cap (tall flat (25 mm height)). It suits liquids, foams and gels, fits 1″ male valves and BOV systems, and is available with a long or short skirt for ogival- or flat-shoulder cans.
L03
L03 is a one-piece ø35 mm spray cap from APU’s unisex L-series, combining a spout with a regular insert and an assembled over-cap (dome-shaped). It suits liquids, foams and gels, fits 1″ male valves and BOV systems, and is available with a long or short skirt for ogival- or flat-shoulder cans.
L04
L04 is a one-piece ø35 mm spray cap from APU’s unisex L-series, combining a spout with a regular insert and an assembled over-cap (cone-shaped). It suits liquids, foams and gels, fits 1″ male valves and BOV systems, and is available with a long or short skirt for ogival- or flat-shoulder cans.
L05
L05 is a one-piece ø35 mm spray cap from APU’s unisex L-series, combining a spout with a regular insert and an assembled over-cap (ø45 mm over-cap). It suits liquids, foams and gels, fits 1″ male valves and BOV systems, and is available with a long or short skirt for ogival- or flat-shoulder cans.
L09
L09 is a ø35 mm twist-lock spray cap. A twist action locks the cap so the product cannot spray when closed, giving safety and control in transit and use. The monolithic body fits the 1″ mounting cup and works with flat- or round-shoulder aluminium cans.
F02
F02 is a ø35 mm twist-lock spray cap. The twist action locks the cap closed to prevent accidental discharge, and the one-piece body fits the 1″ mounting cup on flat- or round-shoulder aluminium cans.
F07
F07 is a ø35 mm vertical spray cap. Its straight-down actuation suits vertical dispensing such as air fresheners and cream sprays, and it takes a plain or concave insert to set the output.
L10
L10 is a ø45 mm spray cap with long or short over-cap options. It fits 45 mm tinplate cans and 45 mm aluminium transfer cans, giving a larger-format finished top for home and personal care aerosols.
L12
L12 is a ø52 mm vertical spray cap designed for air fresheners. It fits 52 mm tinplate cans and dispenses with a straight-down press for consistent room-spray output.
L13
L13 is a ø52 mm horizontal spray cap with a sleek, finished look. Its horizontal spray pattern gives precise, even coverage and controlled directional application, suiting deodorants, air fresheners, hair sprays and insecticides. It fits 52 mm tinplate and 53 mm aluminium transfer cans.
L13i
L13i is the insert-fitted version of the ø52 mm L13 horizontal spray cap. The factory-fitted insert sets the spray orifice for a defined output, keeping the same horizontal spray pattern and 52 mm tinplate / 53 mm aluminium transfer fitment.
A finished top that directs every spray.
APU spray caps are one-piece dispensing tops that combine the actuator and over-cap in a single fitment, giving a finished look on the can while directing the spray.
Moulded in PP/PE, they take a plain or concave insert with an orifice from 0.18 to 0.64 mm to tune the spray to the formula, and are offered across 35, 45, 52 and 57 mm diameters in a wide choice of colours and over-cap shapes.
Quality & Technical Assurance
- Component Matching: Configurable stem, orifice, and gasket matrices tailored to your liquid/gas formulation.
- CSMA Standards Compliance: Fits standard 1″ cans and high-speed filling lines cleanly.
- Dedicated Quality Testing: Batch leak-rate, actuation force, and compatibility lab validation.