TAA

Dust-cover foam pump · 43/410 — Foam Pumps

TAA
Dust-cover foam pump · 43/410

TAA

Product Overview

TAA is a press-to-dispense foam pump with a hinged dust cover. Flip the cover open and press the pump body to dispense fine, even foam — no water and no separate lathering step. The cover keeps the actuator clean and guards against accidental discharge between uses, over a 3,000-press service life.

Key Features & Advantages

Foam on demand

Liquid is aerated as you press, so dense, even foam forms instantly with no separate lathering step.

Flip-open dust cover

A hinged cover keeps the actuator clean and guards against accidental discharge; flip it open and press to dispense.

Multi-dose options

Choose 0.8, 1.2 or 1.5 cc per stroke to match viscosity and pack size.

Efficient dosing

A metered output per stroke makes full use of active ingredients and minimises waste.

Neck / finish
43/410
Dosage per stroke
0.8 / 1.2 / 1.5 cc ± 10%
Full press stroke
16.5 ± 1 mm (0.8 cc) / 20 ± 1 mm (1.2–1.5 cc)
Priming strokes
≤ 5
Actuation force
≤ 30 N
Service life
3,000 presses
Rebound down-force
≤ 30 N
Reflux leakage
≤ 0.1 cc
Waterproof body
No
Materials
PP body & closures, PE piston plates, SUS-304 stainless spring, glass ball, PE dip tube
Storage
Store in corrugated cartons at 5–40°C, protected from moisture and direct sunlight (performance unaffected within 6 months).

ideal for

A range that follows your product.

Hand-wash foam
Facial cleansing foam
Mousse
Body wash

Explore alternative configurations and specialized models from our Foam Pumps range.

Clip-lock foam pump · 40/410
TCK

TCK

TCK is a press-to-dispense foam pump with a clip-lock closure. Flick the clip out and a single press delivers a measured 0.8 cc dose of fine, even foam; clipped shut, the pump stays locked between uses. A built-in waterproof function keeps water out of the pump body, protecting spring rebound and consistent dispensing over a 3,000-press service life.

Clip-lock foam pump · 43/410
TCC

TCC

TCC is a press-to-dispense foam pump with a clip-lock closure. Flick the clip out and a single press delivers a measured 0.8 cc dose of fine, even foam; clipped shut, the pump stays locked between uses. A built-in waterproof function keeps water out of the pump body, protecting spring rebound and consistent dispensing over a 3,000-press service life.

Clip-lock foam pump · 40/410
THD

THD

THD is a press-to-dispense foam pump with a clip-lock closure. Flick the clip out and a single press delivers a metered dose of fine, even foam; clipped shut, the pump stays locked between uses. A built-in waterproof function keeps water out of the pump body, protecting spring rebound and consistent dispensing over a 3,000-press service life.